A tour through the machineroom in october 2005
These pictures were taken a few days after getting my gear back from storage.
After taking care of my own furniture, clothes, trinkets and whatnot, it was
time to setup the machineroom again.
I asked a friend to drop by and take pictures of the machineroom, as it had been ``delivered'' by the movers. You might find these pictures interesting... (although some of them are a bit blurred)
I asked a friend to drop by and take pictures of the machineroom, as it had been ``delivered'' by the movers. You might find these pictures interesting... (although some of them are a bit blurred)
Grab a seat first
The ergonomic stool was still in good shape back then.
Northeast corner
It should be no surprise that I asked the movers to put the larger and heavier
machines `out of the way', so they ended up packed in the corners and against
the walls.
Here is one such corner. It may not look crowded, so let's have a closer look:
Here is one such corner. It may not look crowded, so let's have a closer look:
Isn't that something?
Northwest corner
This corner was the least crowded area, because it was the closest to the
windows, from which all my gear was delivered.
Still, there are quite a few `small' machines, external drive cases, and so on.
The west wall
Slowly turning towards the southwest corner, the west wall was decorated
with most of the machines, stacked on top of each other at random.
Of course, there were not only machines, but also accessory boxes. Or, in this
particular picture, keyboard boxes. Four of them. Large and heavy.
Machines in the middle
The walls and corners were not enough, we had to stack machines in the middle of
the room as well.